How Can We Help?  Call Us Today (800) 255-8990 or

L27600 Series – LED Vaportite (PCB)

The L27600 LED Vaportite Series gasketed enclosure, is perfect for any industrial or commercial application where fixture is exposed to the elements. Ideal for food processing, commercial kitchens, parking garages, car washes schools, government facilities, breweries, livestock containment buildings, laundry mats, and road tunnels.

Specification Sheets
IES Files

Call Factory

Applications

  • Food Processing
  • Cold Storage
  • Car Washes
  • Canopies
  • Health Clubs
  • Laundry Facilities
  • Distribution Centers
  • Stairwells
  • Corridors
  • Covered Parking

Features

  • Low maintenance
  • Energy efficient
  • Advanced lighting control capable
  • UL Wet Listed
  • DLC Premium
  • IP65 Rated
  • RoHS
  • 5 Year Warranty

Specifications

  • Poured in place gasket 
  • Stainless steel latches
  • Polycarbonate lens & enclosure

Technical Information

  • Light Source: LED Board
  • Power Source: LED High Efficiency Power Supply
  • Voltage: Universal 120 to 277
  • CCT: 35K, 40K & 50K
  • CRI: >80
  • Driver capable of 0-10V dimming
  • L70 Rated Life: > 100,000
  • Operating Temperature: -40°C – 50°C Ambient

Dimensions:
(2FT) D 3.1″ W 3.5″ L 23.6″
(4FT) D 3.1″ W 3.5″ L 47.2″
(8FT) D 3.1″ W 3.5″ L 94.5″

Safety Warning

FOR YOUR SAFETY, READ AND FOLLOW ALL INSTRUCTIONS TO PREVENT ELECTRIC SHOCK OR FIRE

  • INSTALLATION REQUIRES KNOWLEDGE OF LIGHTING LUMINAIRE ELECTRICAL SYSTEMS – Contact qualified electrician prior to installation.
  • DISCONNET POWER BEFORE INSTALLATION
  • DO NOT ALTER PRE-EXISTING HOLES OR DRILL NEW HOLES
  • CHECK FOR INCLOSED WIRING COMPONENTS PRIOR TO DRILLING: Luminaire wiring, ballasts, power supplies or other electrical parts may be damaged.
  • USE ONLY ON COMPATIBLE LUMINAIRES: Installation requires specific dimensions and construction features.
  • PROTECT WIRING FROM ABRASION: Do not expose wiring to sharp objects or edges of sheet metal.

Installation Instructions

  1. Disconnect power to the circuit supplying power to the
    fixture
  2. Removed the existing lamps and fixture
  3. Disassemble new fixture to allow access to the LED Driver
  4. Run existing power supply wires into fixture through fixture
    knock-out or end plug on fixture
  5. Mount the fixture to surface, or hang fixture with appropriate
    fixture mounting hardware or install fixture in T-bar Ceiling
    (Be sure to follow local building codes for the appropriate
    fixture installation methods.)
  6. Connect power supply wires to supplied wire disconnect to
    provide power to fixture
  7. Re-assemble fixture
  8. Re-connect power and check installation

Related Products