
L7900 Series – LED Wide Body Vaportite (PCB)
The L7900 LED Wide Body Vaportite Series gasketed enclosure, is perfect for any industrial or commercial application where fixture is exposed to the elements; the L7900 is totally dust and moisture resistant. The enclosure is constructed of a fiberglass upper body and an acrylic diffuser, securely positioned in a permanent poured in place sealing gasket. The diffuser and upper components are locked into place by retaining latches, assuring a secure, tight seal. Ideal for food processing, Cold Storage/ Freezers, Car Washes, Canopies, Health Clubs, Laundry Facilities and Distribution Centers.

PowerPlus enabled. The PowerPlus module turns every light fixture into a port to power electronics, smart devices and IoT connections.
Specification Sheets
Sell Sheet
Applications
- Food Processing
- Cold Storage/ Freezers
- Car Washes
- Canopies
- Health Clubs
- Laundry Facilities
- Distribution Centers
Features
- Low maintenance
- Energy efficient
- Low profile design
- Advanced lighting control capable
- ETL Certified
- DLC Premium
- NSF Rated
- IP65, IP66 and IP 67 Rated
- NEMA 4x
- RoHS
- 5 Year Warranty
Specifications
- Latched from either side for easy installation and maintenance
- Stainless steel latches provide durability and chemical resistance come standard
- Lenses are made of 100% impact resistant acrylic for maximum light transmission and longevity
- UV Stabilized polycarbonate lens optional
- Standard with stainless steel V-hooks
- Hook hangers are available and are UL rated for 4 times fixture weight
Technical Information
- Light Source: LED Board
- Power Source: LED High Efficiency Power Supply
- Voltage: Universal 120 to 277
- CCT: 40K & 50K
- CRI: ±83
- Driver capable of 0-10V dimming
- L70 Rated Life: 131,000
- Operating Temperature: -40°C – 45°C Ambient
Dimensions:
(60WT & 80WT) D 5.85″ W 14.55″ L 26.63″
(120WT & 170WT) D 5.92″ W 14.61″ L 51.91″
Safety Warning
FOR YOUR SAFETY, READ AND FOLLOW ALL INSTRUCTIONS TO PREVENT ELECTRIC SHOCK OR FIRE
- INSTALLATION REQUIRES KNOWLEDGE OF LIGHTING LUMINAIRE ELECTRICAL SYSTEMS – Contact qualified electrician prior to installation.
- DISCONNET POWER BEFORE INSTALLATION
- DO NOT ALTER PRE-EXISTING HOLES OR DRILL NEW HOLES
- CHECK FOR INCLOSED WIRING COMPONENTS PRIOR TO DRILLING: Luminaire wiring, ballasts, power supplies or other electrical parts may be damaged.
- USE ONLY ON COMPATIBLE LUMINAIRES: Installation requires specific dimensions and construction features.
- PROTECT WIRING FROM ABRASION: Do not expose wiring to sharp objects or edges of sheet metal.


Installation Instructions
- Disconnect power to the circuit supplying power to the
fixture - Removed the existing lamps and fixture
- Disassemble new fixture to allow access to the LED Driver
- Run existing power supply wires into fixture through fixture
knock-out or end plug on fixture - Mount the fixture to surface, or hang fixture with appropriate
fixture mounting hardware or install fixture in T-bar Ceiling
(Be sure to follow local building codes for the appropriate
fixture installation methods.) - Connect power supply wires to supplied wire disconnect to
provide power to fixture - Re-assemble fixture
- Re-connect power and check installation